Clutching and Modeling Team Milestones:
1. Learn modeling software (Simulink)
a. Reconstruct Simulink Program - 9/21
b. Check with last years figures - 9/21
c. Improve to accommodate engine or track dyno data - 12/3
d. Fuel consumption and BSFC block to Steady State model - 1/31
e. Determine optimum clutch settings for 500ft drag and 100 mi endurance - 2/1
2. Clutching
a. Clutch component diagrams (notebook: FBD’s and solid models) - 11/16
i. Draft final copies - 1/31
b. Create clutch adjustment matrix (general form, such that any specific setting can be easily determined) - 12/9
c. Obtain and organize clutch toolbox/parts for competition - 1/31
d. Testing to verify clutching modifications - 2/14
3. Expand model to include:
a. Clutching - 12/17
i. Add block for belt efficiency as a function of shift ratio - 1/31
b. Track losses (need track dyno) - TBD
c. Cowl model (need fairing specs) - TBD w/ Cowling
d. Drive train losses (need track dyno) - TBD
e. Fuel system (in conjunction with ECU team) - TBD w/ ECU
i. AFR versus RPM input curve to engine model - 2/14
4. Organize and compile full competition report
a. Rough draft - 2/15
b. Final (competition) draft - 3/1(last minute changes over spring break)
c. Establish Team Contacts - 10/19
i. ECU - Adam McNaughton
ii. Fairing - Kate Charles
iii. Modeling - Geller/Phinney
iv. Dyno - Craig Michaud
5. Miscellaneous
a. Recruit underclassmen for CSC teams - 10/1 -- Ken Kopp from MET is on board
b. Reinforce clutch cover mount bracket - 10/28
c. Cotter pin (quick access) for clutch cover - 1/31
d. ECU and Fuse box mounting bracket - 11/18
