Run Manual

 

Starting Labview

 

  1. Double click Labview Icon.

 

 

Starting Sled

 

  1. Setup snowmobile correctly according to Setup Manual.
  2. Pull up on red E-Stop kill switch.
  3. Turn key until engine fires
  4. Release key

 

Warnings/Cautions

 

·        Be sure all hardware is correctly installed to snowmobile and to the cart before performing dyno run as outlined in the Setup Manual.

 

·        Be sure water system is correctly installed before performing dyno run.

 

·        Be sure all electrical is clear of supply water to avoid shock.

 

·        Stand clear of engine during dyno run in case of mechanical failure.

 

·        Do not exceed maximum RPM of snowmobile.

 

 

Limits of Equipment/Sled

 

·        Snowmobile RPM while conducting a dyno pull should never exceed 7500 RPM.

 

Diagrams Indicating Setup Screen

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

Torque
 
Display Screen While Performing Dyno Run