2/3 Finish
composite coating of main hull on the scale model
2/10 Shape fin housing for scaled
model out of foam and coat with epoxy
2/17 Construct the stern planes and rudder out of composite
material
2/24 Connect fin housing, rudder, and
stern plane to main hull of housing
3/3 Paint scaled model
3/24 Construct rig to hold model in wind tunnel with
appropriate test
gages
3/31 Run initial wind tunnel
tests
4/7 Enter results into
Simulink model
4/14 Construct bow planes if necessary
4/21 Run wind tunnel tests and compare changes in
performance
4/28 Obtain thrust results from Dynamometer Team and enter
into model
6/2006 Competition in San Diego, CA